OH1TV   OH1O   OH1WX                      
                               
  DDS with rotary encoder control                    
 
                             
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
    EIM377 module, with red LED         Rotary encoder is Bourns ENA1J-B28       
                    it is optical and has 128 pulses      
    Buttons from left             needs +5V, outputs a and b with 90deg difference  
      Band down           high quality        
      Band up                        
      10 kHz down         2pcs  serial display modules Sparkfun COM-11443 (yellow)  
      10 kHz up           Driven  here in SPI-mode        
      1 kHz down           data lines parallel,  SDI      
      1 kHz up             clock lines parallel,  SCK      
      500Hz offset test (right second row)       device select lines individual,  CC1, CC2    
                  In UART mode standard speed is 9600baud but can be set higher  
    Processor Picaxe 20X2                      
      runs 64MHz                      
                               
                               
 
                             
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
  Code for Picaxe 20X2 processor is here                      
  The file is in .txt format. Replace .txt with .bas and you have ready program.                
                               
                               
  Back                           25.2.2014